The Application of Wecon PLC and HMI in Coating System
Issue Time:2017-09-27


I .Introduction

The system contains every link what would be needed for coating work, its worked in tight coupling with highly efficiency.

II.Technological Requirement

After start, the fan, lift, vibrating screen, electrostatic power supply, suction powder solenoid valve, recovery pulse valve and powder room pulse valve will working step by step.

III.Solution

This kind of control system mainly use Wecon HMI LEVI-102LK, PLC LX3V-2416MT and 16EYT

IV.Program brief introduction

HMI Design

1.Home Screen
Used to display the current location and real-time frequency of the lift.

已领取-华东区-陈斌-006-20170531-马华涂装系统599
2.Manual manipulation
Each link can be stopped separately.

已领取-华东区-陈斌-006-20170531-马华涂装系统661

3.Parameter setting

已领取-华东区-陈斌-006-20170531-马华涂装系统687
PLC programming
1.The 12 recovery pulse valves are launched on a single cycle.
With changing the address, deal with batch data of the touch screen into the floating point.

已领取-华东区-陈斌-006-20170531-马华涂装系统862

2.Input the filtering setting

已领取-华东区-陈斌-006-20170531-马华涂装系统892

V.System pictures

已领取-华东区-陈斌-006-20170531-马华涂装系统912已领取-华东区-陈斌-006-20170531-马华涂装系统913

VI.Summarize

This system is stable and efficient, which replacing the original handwork or semiautomatic, improved the production efficiency greatly.


sweep yards
subscribe
Please enter your email address for our mailing list to keep your self our lastest updated.
Contact Person
leave a message:
Contact Now
Address:
10 Building, E Area, Software Park, Fuzhou, Fujian
Google+