The application of Wecon HMI&PLC in cold heading machine
Issue Time:2017-01-21

1、Brief

The specialty cold heading process uses high speed automated “cold-headers” or “part formers.” This equipment has the ability of transforming a wire into an intricately shaped part with tight and repetitive tolerances using a tooling progression at speeds up to 400 pieces per minute.

The cold heading process is volume specific and the process uses dies and punches to convert a specific “slug” or blank of a given volume into a finished intricately shaped part of the exact same volume..

2、Solution Design

①HMI:Wecon LEVI-430T, PLC:LX2N-1208MT  Frequency converter

②Equipment

The two basic types of equipment used in specialty cold heading are “cold-headers” and “part formers.” Both use horizontal reciprocating rams and stationary bolsters. Stalcop uses equipment from single blow up to 5-die progression machines with cut-off sizes from 1/8 inch to 1 inch from global manufacturers.

③Tooling

The two major components of cold heading tooling are punches and dies. Punches transfer the required force from the machine to the material and provide close dimensional control on the internal part features. Dies confine and direct the material into the desired geometry and provide close dimensional control on the external part features.

3、Interface design 

The application of Wecon HMI&PLC in cold heading machine(未审核)1338

Time parameter setting

The application of Wecon HMI&PLC in cold heading machine(未审核)1367

4、PLC Design

(Part of PLC Program)

The application of Wecon HMI&PLC in cold heading machine(未审核)1406

5、Product Image

The application of Wecon HMI&PLC in cold heading machine(未审核)1425

sweep yards
subscribe
Please enter your email address for our mailing list to keep your self our lastest updated.
Contact Person
leave a message:
Contact Now
Address:
10 Building, E Area, Software Park, Fuzhou, Fujian
Google+